Reinitialize your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may want to restore your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the settings or are experiencing unexpected behavior. Fortunately, resetting your Holosun is a simple process that can be completed in just a few steps.

• Initially ensuring your red dot sight is powered on.
• Identify the small button for reset on the bottom of the unit.
• Employ a small object to activate the reset switch for approximately 5 milliseconds.
• Release the switch and your Holosun EPS Carry Red Dot sight will restart.
• Its red dot sight should now be returned to its factory settings.

Return to Your Holosun EPS Carry Red Dot back to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to return to original, resetting it to default configuration is a breeze. First, find the tiny button on the rear of your optic. Then, sustain it for around five seconds until you see the indicator light change. Your Holosun EPS Carry is now reverted to its factory settings, ready for precise aiming.

revive your Holosun EPS Carry Back to : Functionality

Is your beloved Holosun EPS Carry experiencing some issues? Don't despair! A simple factory reset can often resolve the problem and get click here your red dot sight back to its former glory. Before you begin, remember to remove the battery from your Holosun EPS Carry to prevent unexpected activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these simple steps:

• Simultaneously press and hold the power button for approximately 5 seconds.
• The display will flash, indicating that the reset is in progress.
• Release the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can re-attach the battery and test your sight's functionality. If you encounter any further problems, don't hesitate to seek help from Holosun's support.

Return Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Follow these steps carefully to ensure a successful factory reset.

• Initially, Activate your Holosun EPS Carry by pressing the power button.
• After that, press and hold both the mode button and the up/down adjustment button simultaneously.
• While continue holding these buttons, tap the power button once.
• A message will show a confirmation prompt indicating that the reset process is initiated.
• Enable the process to finish. This may take a few moments. Once done, your Holosun EPS Carry will automatically deactivate.

After resetting your Holosun EPS Carry to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Clear All Settings on Your Holosun EPS Carry

To Original reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Pressing a specific button combination. Consult your Guidebook for the exact button sequence for your model. Once in the settings menu, look for an option that says "Factory Default". Select this option and confirm the reset. Your sight will then power off and restart with all settings Restored to their default values.

Reset your Holosun EPS Carry via a Factory Original Settings

If your Holosun EPS Carry is acting funny, a factory reset might be the answer. This will restore your sight to its factory settings, clearing any personalized configurations you've made. To accomplish this reset, observe these simple steps:

• Initially, identify the reset lever on your EPS Carry.
• Next, use a thin object, like a toothpick, to push the reset switch.
• During hold the reset switch pressed, power on your EPS Carry.
• You'll display a message indicating that the reset is finished.

Once the reset is finished, your EPS Carry will be set to its factory settings.

Report this wiki page